====================================================== License Agreement for DocuPrint CP305 d PCL 6 ====================================================== 1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain in Fuji Xerox and its third party suppliers. You have no rights in the SOFTWARE except as expressly granted in accordance with this agreement. 2. LICENSE: Under this agreement, you are granted a non-exclusive license to use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in your country. You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer the SOFTWARE to any third party by any tangible media such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a telephone line available to the public or (3) alter, modify, decompile, disassemble, reverse engineer, or create derivative works based on the whole or any part of the SOFTWARE. If any direction on usage or restriction for the SOFTWARE is expressly specified in this web site, you are required to follow such direction. 3. TERM: This agreement is effective upon installing the SOFTWARE until you terminate the agreement by destroying the SOFTWARE. This agreement will also terminate if you fail to abide by any terms of this agreement. In case of termination, you must promptly destroy the SOFTWARE. 4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in violation of any restrictions, laws or regulations imposed by the government of your country or any other relevant countries, and are required to obtain necessary approval prior to exporting the SOFTWARE. ============================================================================= Additional Information: FUJI XEROX DocuPrint CP305 d PCL 6 Printer Driver Version 2.6.28 ============================================================================= This document provides information about the printer driver on the following items: 1. Requirements 2. Software Upgrade from the Earlier Version 3. Limitations 1. Requirements ================= Please note that this print driver operates on a computer running on the following operating system. Microsoft(R) Windows(R) XP Professional x64 Edition Microsoft(R) Windows Server(R) 2003 x64 Editions Microsoft(R) Windows Vista(R) x64 Editions Microsoft(R) Windows Server(R) 2008 x64 Editions Microsoft(R) Windows(R) 7 x64 Editions Microsoft(R) Windows Server(R) 2008 R2 Microsoft(R) Windows(R) 8 x64 Editions Microsoft(R) Windows Server(R) 2012 Microsoft(R) Windows(R) 8.1 x64 Editions Microsoft(R) Windows Server(R) 2012 R2 Microsoft(R) Windows(R) 10 x64 Editions Please visit our web site to check the latest software and supported operating systems. 2. Installation ================= * Refer to the driver user guide provided. 3. Software Upgrade from the Earlier Version ============================================= [Version 2.6.28] * Fixed the problems below, which might occur at printing pages including image data in the environment where Security Update Program released by Microsoft on August 9, 2017 (Security Update Program of August 2017) is applied. - Page is output as a blank page. - Output image is partly missing. - Unable to output because the size of spool data becomes too large. [Version 2.6.23] * Windows 8 have been supported. [Version 2.6.20] * Supported Watermarks features, Forms features, and Annotation features. * Corrected the problem of documents not being printed from applications and services that operate under the Local System account. * Corrected the problem of Multiple-Up information not being registered when using FX-manufactured output management software such as job log collecting service. [Version 2.6.16] * Initial version 4. Limitations ================ * Functional Limitations of EMF Spooling When [EMF Spooling] of [Detailed Settings] tab is set to [Available], the following features may not function normally. To use these features, set [EMF Spooling] to [Not Available]. *[Secure Print][Sample Print] *[Enable Account Setup] [Detailed User Settings] *[Create/Register Forms] *[Separators] of [Separators/Covers] *[ICM Adjustment] of [Image Adjustment Mode] *[Use Extended Features From Application] *[Enable user defined margins] *All features of Direct Fax Driver For the details of [Annotation] limitations, refer to "Annotation features". When [EMF Spooling] of [Detailed Settings] tab is set to [Not Available], some documents with complex structure may have troubles such as distorted output image and failure of the output. In Windows Vista and Windows 7 environment, documents can be output normally. Also in Windows(R) XP and Windows Server(R) 2003 environments, documents can be output normally by applying SP2. * Watermarks features In Windows(R) XP SP2, Windows Server(R) 2003 SP2, Windows Server(R) 2008 and Windows Vista(R), Windows 7 environments, when [EMF Spooling] of [Detailed Settings] tab is set to [Not Available], [Watermarks] is not available for use by 32bit application software. To use this feature, set [EMF Spooling] to [Available]. * Annotation features In Windows(R) XP SP2, Windows Server(R) 2003 SP2, Windows Server(R) 2008 and Windows Vista(R), Windows 7 environments, however, even if [EMF Spooling] is set to [Not Available], the feature is not available for use by 32bit application software. To use this feature, set [EMF Spooling] to [Available]. * On Windows 8 or later, Annotation and Watermark may not be printed even if [Annotation] and [Watermark] are specified. To make them function, set [EMF Spooling] to [Enabled] on the [Advanced] tab. * To print in color from Application of Windows Store, open [Devices and Printers] from Windows Desktop, right-click on your printer to select [Print Settings] and then confirm that [Output Color] on the [Paper / Output] tab of the [Print Setting] dialog is set to [Color]. If the setting of [Output Color] on the [Paper / Output] tab of the [Print Settings] dialog remains [Black and White], the output will be in black and white even if you specify [Output Color] to [Color] on the printing setting screen shown after you select printer from the device charm. * If you set EMF Spooling to [Enabled] and perform 2-Sided Print with documents of odd number of pages, a blank page may be inserted on the last page depending on application or OS. ===================================================================== Portions of this software are based in part on the work of the Independent JPEG Group. Microsoft is the registered trademark of Microsoft Corporation. Windows is the registered trademark of Microsoft Corporation. Other names of products and companies are the trademarks or registered trademarks of each company. Copyright 2012-2018 Fuji Xerox Co., Ltd. All rights reserved. ----------------------------< End of File >--------------------------